Low capacity load cell
|
Dedicated remote load cell series - 8 capacities from 250 grams to 1000 pounds.
Chatillon DFGS-R dedicated remote load cell force gauges offer the same operation, and output/interface features of Chatillon DFGS Integral Load Cell force gauges with the added versatility of a remote cell. These gauges are suitable for applications where space or environmental factors will not permit the use of a regular gauge. Each dedicated cell and corresponding gauge electronics are factory matched and calibrated to provide the same accuracy as the integral cell models: ±0.15% of full scale, ± least significant count.
The remote load cell interfaces with the force gauges electronics via a detachable coiled cable. The 50 lb through 1000 lb cells are standard "S" beam design with threaded holes at the top and bottom on center for mounting in either tension or compression applications. The 250 gram, 2 pound and 10 pound cells are a different configuration and are encased in a small aluminum box for handling protection. The smaller cells incorporate a threaded shaft for applying tensile strength or compression force. A threaded hole in the load cell case (opposite the shaft) is provided for mounting the lighter capacity remote cells. |
Accuracy: ±0.15% of full scale ±1 LSC (least significant
count)
Tare Capacity: 10% of full scale in pound or ounce mode
Full Scale Deflection: 0.010"
Analog Output: 0 to ±2.0 VDC full scale, accurate to ±0.018
Volt
Temperature: 40° to 110°F (5°C to 45°C), Stability: 0.03%
per °F
Weight: Gauge body: 1 lb, load cell (dependant on capacity):
1/4 - 1 lb, Shipping weight with case and attachments: 7 lb max
Remote Cell Dimensions/Thread Sizes:
- 250 gram, 2 lb & 10 lb: 2-1/2" H x 2" W x 3/4" thick;
Cell thread: #10-32 x 3/16" lg male; mtg. hole: #10-32 x
3/16" deep female
- 50 lb, 100 lb & 200 lb: 2-1/2" H x 2" W x 3/4" thick;
Cell thread: 1/4-28 female (top and bottom)
- 500 lb & 1000 lb: 2-1/2" H x 2" W x 1" thick;
Cell thread: 1/2-20 female (top and bottom)
 Standard
Accessories:
Gauge body, remote load cell with cable, battery charger, Allen
wrench and operation manual are furnished in a cushioned carrying
case.
| Model |
Capacity x Graduation |
Safe Overload* |
| DFGS-R-250G |
8 oz x 0.005 oz |
5 lb |
| 250 g x 0.1 g |
| 2.5 N x 0.001 N |
| DFGS-R-2 |
2 lb x 0.001 lb |
20 lb |
| 1 kg x 0.001 kg |
| 10 N x 0.01 N |
| DFGS-R-10 |
10 lb x 0.005 lb |
30 lb |
| 5 kg x 0.005 kg |
| 50 N x 0.05 N |
| DFGS-R-50 |
50 lb x 0.02 lb |
75 lb |
| 25 kg x 0.01 kg |
| 250 N x 0.1 N |
| DFGS-R-100 |
100 lb x 0.05 lb |
150 lb |
| 50 kg x 0.05 kg |
| 500 N x 0.5 N |
| DFGS-R-200 |
200 lb x 0.1 lb |
300 lb |
| 100 kg x 0.1 kg |
| 500 N x 0.5 N |
| DFGS-R-500 |
500 lb x 0.2 lb |
750 lb |
| 250 kg x 0.1 kg |
| 2500 N x 1 N |
| DFGS-R-1000 |
1000 lb x 0.5 lb |
1500 lb |
| 500 kg x 0.5 kg |
| 5000 N x 5 N |
| DFGS-R-ND |
Remote Force Gauge without Load
Cell |
| REMOTE-2 |
Non-Dedicated Remote
Load Cell |
2 lb |
| REMOTE-10 |
Non-Dedicated Remote
Load Cell |
10 lb |
| REMOTE-50 |
Non-Dedicated Remote
Load Cell |
50 lb |
| REMOTE-100 |
Non-Dedicated Remote
Load Cell |
100 lb |
| REMOTE-200 |
Non-Dedicated Remote
Load Cell |
200 lb |
| REMOTE-500 |
Non-Dedicated Remote
Load Cell |
500 lb |
| REMOTE-1000 |
Non-Dedicated Remote
Load Cell |
1000 lb |
| REMOTE-2000 |
Non-Dedicated Remote
Load Cell |
2000 lb |
| REMOTE-5000 |
Non-Dedicated Remote
Load Cell |
5000 lb |
| REMOTE-10000 |
Non-Dedicated Remote
Load Cell |
10000 lb |
| NC000300 |
Mounting Kit for LTS, LTC, LTCM,
TCM201, TCD-200 Test Stands |
| NC000225 |
Mounting Kit for HTC Test Stand |
| NC000228 |
Adapter for Material Test Grips |
*maximum load with no mechanical damage
(display blanks at 110% rated capacity )
Please click here for
recommended Test Stand configurations
Click here for Brochure
(Adobe PDF)
|
