|
Integral Load Cell Gauge in six capacities from 2 to 500 lbs. - Chatillon DFIS digital force gauges offer the same accuracy and digital data communications capabilities as the full-featured DFGS series in an economical and user-friendly product. The four basic keypad functions provide for minimal operator training in production floor or laboratory environments. The internal digital sampling rate of 1000 samples per second provides a high level of accuracy in all but the most demanding force peak applications. |
Accuracy: ±0.15% of full scale ±1 LSC (least significant
count)
Tare Capacity: 10% of full scale in pound mode
Full Scale Deflection: 0.010"
Temperature: 40° to 110°F (5°C to 45°C), Stability: 0.03%
per °F
Weight: Instrument: 2 lbs (6 lb shipping weight)
Operation Features:
- Internal digital sampling rate of 1000 samples per second
- Peak function automatically captures and stores highest instantaneous
reading within each test. The peak function may be engaged
prior to testing to freeze the display at the highest reading. It
may also be engaged after the test to display the peak value
stored. The "zero" key clears peak memory.
- Tension/compression modes are indicated by "T" for
tension or "C" for compression upon force application.
In the digital output, tension values are identified with a minus
sign
- Selectable units of measurement: lb, kg or N
- Push button calibration
- Rechargeable battery or AC operation allows 8 hour continuous
battery operation with 12-14 hour charge. Low battery indicator
on display. Continuous AC operation via charger/AC adaptor
- Available for 110 VAC or 220 VAC
Output/Interface Features:
| 
|
Shown on LTS
test stand |
- Bi-directional RS232 interface for data transmission as well
as peripheral control of all gauge keypad functions. Digital
data transmission up to 75 data points per second may be accomplished
via the interface. Data transmission parameters are user-selectable. (Baud
rates from 300 to 19,200). The DFIS may also be interfaced
with a Chatillon TCD-200 digital
test stand so that both gauge and stand may be peripherally controlled.
- Mitutoyo output (modified BCD) for use with Mitutoyo brand
processors
- Analog Output: 0 to ±2.3 Vdc full scale (approximate)
Physical Design Features:
- Die cast metal reversible housing. Split housing design permits
upright display whether gauge is hand held or test stand mounted.
- Easy to read 1/2" high LCD display with 4-1/2 digits for
forced value. Smaller characters within the display indicate
units of measurement, test mode and low battery
- 4 key membrane keypad with separate on/off switch
- 2 separate rear mounting hole patterns: (2) #10-32 thread holes
for light duty stands, or (4) 1/4-20 thread holes for heavy duty
stands.
- Removable load cell shaft: 2 lb through 100 lb: #10-32 thread,
200 lb & 500 lb: 5/16-18 thread
- Side holes for optional threaded handles
- Output connector: 12 pin "Hirose" design
Standard Accessories:
Stainless steel attachments include a flat head, hook, cone, chisel
and extension rod. Gauge, battery charger, attachments, Allen wrench
and operation manual are furnished in a cushioned carrying case.
Please click here for
recommended Test Stand configurations
| Model |
Capacity x Graduation |
Safe Overload* |
| DFIS2 |
2 lb 0.002 lb |
5 lb |
| 1 kg x 0.001 kg |
| 10 N x 0.01 N |
| DFIS10 |
10 lb x 0.01 lb |
20 lb |
| 5 kg x 0.005 kg |
| 50 N x 0.05 N |
| DFIS50 |
50 lb x 0.05 lb |
75 lb |
| 25 kg x 0.02 kg |
| 250 N x 0.02 N |
| DFIS100 |
100 lb x 0.1 lb |
150 lb |
| 50 kg x 0.05 kg |
| 500 N x 0.5 N |
| DFIS200 |
200 lb x 0.2 lb |
300 lb |
| 100 kg x 0.1 kg |
| 1000 N x 1 N |
| DFIS500 |
500 lb x 0.5 lb |
750 lb |
| 250 kg x 0.2 kg |
| 2500 N x 2 N |
| 13046 |
2 each, Aluminum Pull Handles |
| LTCK-2 |
Mounting Kit for LTS, LTC and
LTCM4 Test Stands |
| HTCK-1 |
Mounting Kit for HTC and UTSM
Test Stands |
*maximum load with no mechanical damage (display blanks at 110%
rated capacity )
Click here for Brochure
(Adobe PDF)
|
