Imada’s digital torque tester is ideal for calibrating power screwdrivers with torque control. It features peak mode to capture the peak torque achieved during a test, real time mode to display torque transients, and peak down mode to capture critical first peak value. Standard 3/8 inch drive is good for checking torque wrenches but not impact wrenches. All digital torque testers are sold in kit form complete with tester, hard carrying case, 2 smart driver adapters and AC charger/adapter. A calibration kit is also available.

• Accuracy: ±0.5% F.S., ±1 LSD
• Wide measuring range up to 130 lb-in
• lb-in, Kg-cm and N-cm (selectable)
• Peak, Real Time and Peak Down measuring modes (selectable)
• Measure both clockwise and counterclockwise
• RS-232 output for SPC capability (peak data only)
• Programmable automatic display reset
• Heavy-duty metal construction
• Runs on internal NiCad batteries or AC adapter
• 2 - Driver adapters included
  i-8 & i-80 come with Smart adapters
  CD-130 comes with spring adapters
• 3/8" drive for socket wrenches

Note: Do not use with impact or air tools (See the DI-1M impact wrench torque tester).
Smart driver adapters simulate screw tightening, eliminating the need for reversing the power driver which is required for conventional driver adapters

Standard Driver Adapters (2 included with tester)

	i-8		i-80		CD-130
Adapter	Smart Adapters				Spring Adapters
Model	OW-025E	OW-10E	OW-20E	OW-60E	SJ-50	SJ-100
Range lb-in	2	9	18	52	8-50	50-130
Mechanical life	10000 hrs	8000 hrs	5000 hrs	5000 hrs	2500 times	2500 times
Screw on top	6-32	6-32	8-32	1/4-20	5/16-18	3/8-16
Plug to socket	3/8 inch square x 5/32 inch (20 mm square x 4 mm)