|
MV-500BA (Basic Type)
MV-500AC (Auto Cycle Type)
MV-1100BA (Basic Type)
MV-1100AC (Auto Cycle Type) |
- Max Load: MV-500 - 500 lbs, MV-1100 - 1100 lbs
- One stand for both compression (push) and tension (pull) tests
- Stroke: 16"
- Combination of ball screw drive system and high performance
brushless motor provides extremely smooth and powerful operation
over the entire speed range.
- Test speed mode: fixed (presettable) or adjustable
Return speed: fixed max. or adjustable
- Auto cycle feature
- Optional dynamic and static distance meter available
Speed Configurations
| Model |
MV-500BA |
MV-1100AC |
| Standard Speed |
0.3 ~ 9.5" / min |
0.4 ~4.5" / min |
| Optional High Speed |
0.5 ~ 15.7" / min |
0.8 ~ 8 " / min |
| Optional Low Speed |
0.2 ~ 4.7 " / min |
0.2 ~ 2 " / min |
Optional Lexan Safety Shield
- 1/4" unbreakable lexan
- Helps protect personnel from injury by containing debris during testing
- Allows access to the control panel
The Lexan safety shield offers protection to the operators of motorized test stands. Access to the test stand controls is still available through the front of the shield. Made of 1/4" lexan, it is virtually unbreakable and will contain the debris from destructive testing. Helps to prevent accidental injuries. Fits all Imada motorized vertical test stands. Dimensions 16.5" x 15.75" x 31.5"
Optional Data Buttons and Data Software
Imada DB-Series data input buttons work with Imada SW software
to automate data collection from Imada force or torque gauges. Enter
peak measurements into the spreadsheet and "zero" the gauge
with a touch of the button. Minimize computer time and mouse useage
Click here for more info...
The Imada MV-500 or MV-1100 vertical motorized test stand offers consistent and reliable testing.
The combination of ball screw system and state of the art brushless
motor provides extremely smooth and powerful operation over the
entire speed range. It features dual speed mode: fixed speed (presettable)
and adjustable speed. They accept any of the standard range Imada
force gauges. Quick return and Emergency Stop features are also
included.
Basic Models: MV-275BA,
MV-500 BA
Basic Models have top and bottom travel limits that can be adjusted
for a precise range of movement. Set the travel limits, flip the
direction switch up to move the cross head up to the top travel
limit at the selected speed. Flip the direction switch down to
send the cross head down to the bottom travel limit. The speed
is set by a Speed Adjust knob. Quick Return and Emergency Stop
features are also included.
Auto Cycle Models: MV-275AC,
MV-500AC, MV-1100AC
Auto cycle models have top and bottom travel limits that can be
adjusted for a precise range of movement. Speed Adjust, Quick Return
and Emergency Stop features are also included. These stands have
three function modes
- Manual Mode
While the Direction switch is held up, the head moves up. Holding the switch
down moves the cross head
- Single Cycle Mode
When the Direction switch is pushed up, the cross head moves up at the desired
speed, and when it reaches the top travel limit, it automatically goes
back and stops at the bottom travel limit, completing one cycle. Pushing
the switch down runs the cycle in reverse
- Auto Cycle Mode
This mode is similar to Single Cycle mode, except that the cross head travels
up and down repeating the cycle until either the Power or Emergency switches
is turned off. This mode is ideal for applications such as fatigue testing
Imada MV-1100 diagram
Imada MV-500 diagram
|
