The Mark-10 BGI Force / Torque Gauge is a unique product designed for working in conjunction with a variety of interchangeable remote force and torque sensors. The sensors do not require calibration or setup - the Mark 10 BGI automatically recognizes any sensor. All configuration and calibration data is saved in the sensor's connector. Simply plug and play!

Features:

• Fully interchangeable force and torque BGI force/torque sensors with "personality" modules containing all calibration and user-set data
• Unlimited number of sensors possible due to unique design
• Programmable default configuration for each sensor
• RS-232, Mitutoyo and analog outputs
• GCL - Gauge Control Language for full computer control of all functions
• Automatic timed output on RS-232
• Averaging mode for obtaining average force readings over time
• External trigger for data capture and switch testing
• Programmable dual set points with outputs
• Programmable analog and digital filters
• Programmable initial status of units and mode of operation
• General purpose I/O for external device control
• Programmable auto-shutoff
• Permanent configuration memory
• Selectable units of measurement
• Push-button calibration
• Battery or AC operation
• Automatic peak reading memory
• NIST-traceable certificate included

Specifications:

• Accuracy: ± 0.1% of full scale ±1 digit + sensor's accuracy
• Sampling rate: 65 readings/sec
• Display rate: 2.5 - 10 per second, 65/sec in peak mode
• Display: 4-1/2 digit LCD with 0.3 inch (7.6 mm) high. Symbols for low battery, units and mode of operation
• Power: AC or rechargeable battery with IPM - Intelligent Power Monitoring System
• Battery life: 6 to 10 hours of continuous use
• RS-232: Fully configurable up to 9600 baud. Includes GCL - Gauge Control Language
• Mitutoyo output: Serial BCD suitable for all Mitutoyo SPC-compatible devices
• Analog output: ± VDC ±0.25% of full scale at capacity. Positive for compression, negative for tension
• Set Point Outputs: 3 open collector lines (utilizing Mitutoyo lines)
• General Purpose I/O: 3 open collector outputs and one input (utilizing Mitutoyo lines)
• Weight: 0.9 lbs (0.4 kg)
• Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
• Warranty: 3 years

BGI Force Sensors

Mark-10 SSM Force Sensors From $617	Mark-10 SBC Force Sensors $617	Mark-10 SS Force Sensors from $565	Mark-10 SJR Force Sensors $897
Inline force sensors, tension and compression From 0.25 to 100 lbs	Miniature button force sensors, compression only From 100 to 10000 lbs	S-beam force sensors, tension and compression From 50 to 10000 lbs	Miniature S-beam force sensors, tension and compression From 0.25 to 100 lbs

BGI Torque Sensors

Mark-10 STB Torque Sensors $1425	Mark-10 STC Torque Sensors From $760	Mark-10 STE Torque Sensors $1135	Mark-10 STJ Torque Sensors From $705	Mark-10 STH Torque Sensors $707
Closure torque sensors From 10 to 100 lbs	Tool calibration torque sensors From 10 to 100 lbs	Wrench extension torque sensors From 20 to 5000 lbs	Universal torque sensors From 10 to 100 lbs	Universal torque sensors with interchangeable attachments From 10 to 100 lbs

Optional Equipment (for use with all sensors)

• Hi / lo limits indicator
  Set limit conditions for a test - the indicator will display red lights for high and low limits, and a green light to indicate passing.
• Overload protection module
  Protects the force gauge against overloads during motorized tests, adjustable from 20 - 110% of gauge's full capacity. For use with Mark-10 motorized test stands.
• Set point cable
  Stops test stand travel at programmable high and low set points for tension and compression forces. For use with Mark-10 motorized test stands.
• Output cable
  Send test data to a PC, statistical printer, or other data collector for further analysis
• Table top stand
  Includes mounting holes for bench mounting and angle adjustment.

Model	Optional Accessories	Price
AC1004	Mounting kit, BGI to TS-Series test stands	$47
AC1008	Table Top Stand	$85
09-1047	Cable, BG/CG/EG/BGI to Mitutoyo SPC	$71
09-1048	Cable, BG/CG/EG/BGI to RS-232, 25-pin	$71
09-1048A	Cable, BG/CG/EG/BGI to RS-232, 9-pin	$71
09-1090	Cable, set point, BG/BGI/CG to test stand	$137
11-1022	Hi / Lo limits indicator for BG/BGI/CG	$85
11-1042	Overload protection module, BG/CG/EG/BGI to test stand	$185

Dimensions: