The Mark-10 ESM300 Digital Force Measurement Test Stand is a highly configurable motorized test stand for tension and compression applications up to 300 lb (1.5 kN). This digital test stand introduces a unique concept in force testing: all major controller software features are optional and may be purchased at time of order or added by the user in the field at a later date. Such flexibility makes the Mark 10 ESM300 a highly versatile tester that can be as basic or advanced as required, from basic push/ pull requirements to advanced sequences for demanding test procedures. When fully equipped, the stand has a class-leading speed range, programmable cycling sequences with dwell time at limits, auto-return, button control options, password protection, and more. An LCD with intuitive menu navigation and modular mechanical design round out the exciting features of this motorized test stand.

Standard Features

Controller Features

• LCD display with UP, DOWN, STOP, and emergency stop buttons and soft keys
• Selectable speed units of measurement (in/min & mm/min)
• Confi gurable password prevents unwanted changes to test parameters

Test Frame Features

• Integrated travel limit switches
• Removable fi xture mounting plate with matrix of threaded holes
• Stepper motor-driven, produces 0% speed variation with increasing load
• Mounting holes for bench mounting
• Unique mechanical design signifi cantly reduces column bending

Optional Hardware Features

• Digital travel display - 6 in [150 mm] travel, 0.0005 in [0.01 mm] resolution, SPC output for data collection.
• Set point cable - Stops test stand travel or cycles between programmable high and low force set points. Compatible with Mark-10 force gauges with set point outputs only.
• Overload protection module - Protects the force gauge against overloads, adjustable from 20 - 110% of gauge’s full capacity. Compatible with Mark-10 force gauges equipped with analog output.
• Column extensions - Available in 6 in (150 mm), 12 in (300 mm), 24 in (600 mm), and custom lengths

Optional Controller Features

Any of the below option packages may be purchased at time of order or may be added in the field at a later date by entering an activation code:

• Auto-return - The crosshead moves to a limit switch or force set point (requires a force gauge with set point outputs), stops, and reverses direction at full speed to the other limit switch or set
  point.
• Cycling / Dwell Time - The crosshead to move up and down between limit switches or force set points (requires a force gauge with set point outputs). Configurable up to 99,999 cycles. Dwell time allows the operator to program the length of time, up to 9,999.9 seconds, in 0.1 second
  intervals, for which the crosshead pauses at limits.
• Programmable Button Functions - Expands UP and DOWN button operation to three user-configurable modes:
  1. Maintained (standard): a short push produces continuous motion until STOP is
     pressed
  2. Momentary: crosshead moves only while the button is pressed
  3. Auto: short push produces maintained motion, while holding the button down will
     produce momentary motion
     
• Independent Up and Down Speeds - Configurable speeds for up and down directions
  
• Low Speed Extended Range - Extends the speed range to 0.02 - 13 in/min (0.5 - 330 mm/min)
• High Speed Extended Range - Extends the speed range to 0.5 - 45 in/min (13 - 1100 mm/min)
• Complete Speed Range - Extends the speed range to 0.02 - 45 in/min (0.5 - 1100 mm/min)

Mark-10 ESM-300 optional Travel Display above