Mark-10 Grips & Attachments for Force Testing

Mark-10 > Force Testing > Torque Testing

Mark-10 G1011 Rubber Tip

Mark 10-G1011 Rubber Tip

This attachment is designed to simulate a finger for testing pushbuttons, membrane switches, etc. Use this grip with a Mark-10 force gauge and test stand to create a complete compression testing system.

Capacity (lb / N)	Weight (lb / kg)
50 / 250	0.01 / 0.004

Mark-10 G1018 Swivel Adapter

Use these adapters between any grip and force gauge to provide a swiveling action for proper sample alignment.

Model	Capacity (lb / N)	Weight (lb / kg)	A	B
G1018-1	200 / 1000	0.12 / 0.05	#10-32M	#10-32M
G1018-2	500 / 2500	0.27 / 0.12	5/16-18M	5/16-18M

Mark-10 G1016 and G1017 Series STH Torque Sensor Attachments

Mark-10 G1016 and G1017 Series STH Torque Sensor Attachments
G1016-1 above

G1016-2 above

G1016-3 above

Mark-10 G1016 and G1017 Series STH Torque Sensor Attachments
G1017 above

Mark-10 G1016 and G1017 Series STH Torque Sensor Attachments
G1016 diagram above

Mark-10 G1016 and G1017 Series STH Torque Sensor Attachments
G1017 diagram above

These attachments mount directly to Series STH torque sensors for various torque measurement applications. Select a size appropriate for your sample.

Model	Capacity lb-in / N-m	Weight lb / kg	A	ØB	ØC
G1016-1	100 / 11.3	026 / 0.12	2.9 / 73.7	0.188 / 4.7	0.028-0.25 / 0.7-6.3
G1016-2		0.36 / 0.16	3.16 / 80.3		0.062-0.375 / 1.6-9.5
G1016-3		0.67 / 0.3	3.73 / 94.7		0.078-0.5 / 2-12.7
G1017		0.11 / 0.05	2.33 / 59.2		1/4" hex

Mark-10 G1010 Jacobs Chuck Pin Vise

This grip is suitable for holding round samples such as wire or tubing up to 0.375" dia. It can mount to any force gauge or test stand. Includes key.

Capacity (lb-in / N-m)	Weight (lb / kg)	ØA
30 / 150	0.35 / 0.16	0.062-0.375 / 1.6-9.5

Mark-10 Hooks

These hooks are ideal for a variety of tensile tests. Use them with a force gauge and a test stand to create a complete testing system.

Model	Capacity (lb / N)	Weight (lb / kg)	RA	B	ØC	D
G1028	20 / 100	0.01 / 0.005	0.05 / 1.3	1.0 / 25.4	0.1 / 2.5	#10-32F
G1038	200 / 1000	0.02 / 0.009	0.2 / 5.1	1.5 / 38.1	0.19 / 4.8	#10-32M
G1035	500 / 2500	0.5 / 0.023	0.3 / 7.6	1.9 / 48.3	0.28 / 7.1	5/16-18M
G1042	1000 / 4500	0.32 / 0.145	0.5 / 12.7	4.1 / 104.1	0.45 / 11.4	1/2-20M

Mark-10 G1029 & G1036 Flat Heads

These attachments are ideal for compression testing of buttons, membrane switches, etc. Use them with a force gauge and a test stand to create a complete testing system.

Model	Capacity (lb / N)	Weight (lb / kg)	ØA	B	C
G1029	200 / 1000	0.01 / 0.005	0.5 / 12.7	0.5 / 12.7	#10-32F
G1036	500 / 2500N	0.06 / 0.027	0.75 / 19.1	0.87 / 22.1	5/16-18F