The Mark-10 BGI Force / Torque Gauge is a unique product designed for working in conjunction with a variety of interchangeable remote force and torque sensors listed below. The sensors do not require calibration or setup - the BGI automatically recognizes any sensor. All configuration and calibration data is saved in the sensor's connector. Simply plug and play!
Mark-10 SSM Inline Compression and Tension Testing Sensor
Hooks not included
Force measurement sensor for tensile and compressive loads in a wide variety of applications, available in capacities from 0.25 lb to 100 lb. Thread on two sides can accept a variety of hooks and implements, making this sensor particularly well suited for inline tests.
Member of the BGI family of interchangeable sensors
"Personality module" holds all calibration and configuration data
Rugged aluminum housing
Measures tensile and compressive forces
Remote operation
Small Size
NIST-traceable certificate of calibration included
Accuracy: ± 0.15% of full scale ±1 digit + BGI
Weight: 0.4 lbs (0.2 kg)
Warranty: 3 years
Model
Capacity x Resolution
Price
SSM025
0.25 X 0.0001 lb, 100 x 0.05 gF, 1 x 0.0005 N
$736
SSM05
0.5 x 0.0002 lb, 250 x 0.1 gF, 2.5 x 0.001 N
$736
SSM2
2 x 0.001 lb, 1 x 0.0005 kgF, 10 x 0.005 N
$617
SSM5
5 x 0.002 lb, 2.5 x 0.001 kgF, 25 x 0.01 N
$617
SSM10
10 x 0.005 lb, 5 x 0.002 kgF, 50 x 0.02 N
$617
SSM20
20 x 0.01 lb, 10 x 0.005 kgF, 100 x 0.05 N
$617
SSM50
50 x 0.02 lb, 25 x 0.01 kgF, 250 x 0.1 N
$617
SSM100
100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N
$617
AC1018
Mounting kit, SS/SSM to TS-Series test stands
$95
Mark-10 SJR Miniature Force Sensors
Extremely compact force measurement sensor for tensile and compressive loads in applications with limited space. The Series SJR is available in capacities from 0.25 lb to 100 lb (1 N to 500 N). Every capacity has the same miniature dimensions: 0.85" x 0.30" x 0.75" (21.6 mm x 7.6 mm x 19.1 mm). The sensors feature outstanding mechanical overload protection of up to 1,000% percent of full scale for most applications and threaded holes on two sides for the mounting of attachments or implements.
Member of the BGI family of interchangeable sensors
"Personality module" holds all calibration and configuration data
Measures tensile and compressive forces
Mechanical overload protection of up to 1,000% of full scale for all models, 200% for SJR50 and SJR100 when used in tension only
NIST-traceable certificate of calibration included
Accuracy: ± 0.2% of full scale ±1 digit + BGI
Weight: 0.015 lbs (0.007 kg)
Warranty: 3 years
Model
Capacity x Resolution
Price
SJR025
0.25 X 0.0001 lb, 100 x 0.05 gF, 1 x 0.0005 N
$897
SJR05
0.5 x 0.0002 lb, 250 x 0.1 gF, 2.5 x 0.001 N
$897
SJR2
2 x 0.001 lb, 1 x 0.0005 kgF, 10 x 0.005 N
$897
SJR5
5 x 0.002 lb, 2.5 x 0.001 kgF, 25 x 0.01 N
$897
SJR10
10 x 0.005 lb, 5 x 0.002 kgF, 50 x 0.02 N
$897
SJR20
20 x 0.01 lb, 10 x 0.005 kgF, 100 x 0.05 N
$897
SJR50
50 x 0.02 lb, 25 x 0.01 kgF, 250 x 0.1 N
$897
SJR100
100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N
$897
Mark-10 SS Tension and Compression Force Sensor
A rugged force measurement sensor for tensile and compressive forces up to 10,000 lb. Durable S-Beam architecture allows for many applications and setups. Solid steel construction ensures many years of use in factory or laboratory environments.
Member of the BGI family of interchangeable sensors
Remote operation
Small size
"Personality module" holds all calibration and configuration data
Measures tensile and compressive forces
NIST-traceable certificate of calibration included
Accuracy: ± 0.15% of full scale ±1 digit + BGI
Weight: From 1.9 lbs (0.9 kg) to 3 lbs (1.4)
Warranty: 3 years
Model
Capacity x Resolution
A
B
C
D
E
Price
SS50
50 x 0.02 lb, 25 x 0.01 kgF, 250 x 0.1 N
2.4
(61.0)
2.0
(50.8)
0.46
(11.7)
0.65
(16.5)
1/4-28 UNF
$565
SS100
100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N
$565
SS200
200 x 0.1 lb, 100 x 0.05 kgF, 1000 x 0.5 N
$565
SS500
500 x 0.2 lb, 250 x 0.1 kgF, 2500 x 1 N
0.71
(18.0)
0.9
(22.9)
1/2-20 UNF
$565
SS1000
1000 x 0.5 lb, 500 x 0.2 kgF, 5000 x 2 N
$565
SS2000
2000 x 1 lb, 1000 x 0.5 kgF, 10000 x 5 N
0.96
(24.4)
1.15
(29.2)
$565
SS5000
5000 x 2 lb, 2500 x 1 kgF, 25 x 0.01 kN
3.9
(99.1)
3.0
(76.2)
3/4-16 UNF
$802
SS10000
10000 x 5 lb, 5000 x 2 kgF, 50 x 0.02 kN
$802
Mark-10 SBC Compression Force Sensors
Button sensor for compressive loads of up to 10,000 lb. Compact and rugged, the SBC is ideal for heavy duty applications with space constraints
Member of the BGI family of interchangeable sensors
"Personality module" holds all calibration and configuration data
Small size
Stainless steel construction
NIST-traceable certificate of calibration included
Accuracy: ± 0.5% of full scale ±1 digit + BGI
Weight: 0.4 lbs (0.2 kg)
Warranty: 3 years
Model
Capacity x Resolution
ØA
ØB
C
D
ØE
F
ØG
Price
SBC100
100 x 0.05 lb, 50 x 0.02 kgF, 500 x 0.2 N
1.23
(31.3)
0.32
(8.1)
0.05
(1.3)
0.39
(9.9)
1.0
(25.4)
thru
0.83
(21.1)
$617
SBC200
200 x 0.1 lb, 100 x 0.05 kgF, 1000 x 0.5 N
$617
SBC500
500 x 0.2 lb, 250 x 0.1 kgF, 2500 x 1 N
$617
SBC1000
500 x 0.2 lb, 250 x 0.1 kgF, 2500 x 1 N
$617
SBC1000
1000 x 0.5 lb, 500 x 0.2 kgF, 5000 x 2 N
$617
SBC2000
2000 x 1 lb, 1000 x 0.5 kgF, 10000 x 5 N
$617
SBC5000
5000 x 2 lb, 2500 x 1 kgF, 25 x 0.01 kN
1.48
(37.6)
0.43
(10.9)
0.07
(1.8)
0.62
(15.8)
1.25
(31.8)
0.25
(6.4)
1.08
(27.4)
$617
SBC10000
10000 x 5 lb, 5000 x 2 kgF, 50 x 0.02 kN
$617
Mark-10 STJ Universal Torque Sensors
Measure bi-directional torque for a wide variety of applications. Contains a chuck for samples up to 1/2" in diameter, depending on capacity. The sensor can be used as a hand held device, or mounted to a torque test stand. Capacities available from 10 oz-in to 100 lb-in.
Member of the BGI family of interchangeable sensors
"Personality module" holds all calibration and configuration data
Rugged aluminum housing
NIST-traceable certificate of calibration included
Accuracy: ± 0.35% of full scale ±1 digit + BGI
Weight: From 1.4 lbs (0.6 kg)
Warranty: 3 years
Model
Capacity x Resolution
A
Chuck Capacity
Price
STJ10OZ
10 x 0.01 oz-in, 7 x 0.005 kgF-mm, 7 x 0.005 N-cm
4.82
(122.4)
0.38
(9.5)
$755
STJ20OZ
20 x 0.02 oz-in, 14 x 0.01 kgF-mm, 14 x 0.01 N-cm
$755
STJ50OZ
50 x 0.05 oz-in, 36 x 0.05 kgF-mm, 35 x 0.05 N-cm
$755
STJ12
12 x 0.01 lb-in, 140 x 0.1 kgF-mm, 135 x 0.1 N-cm
5.19
(131.8)
0.5
(12.7)
$705
STJ50
50 x 0.05 lb-in, 580 x 0.5kgF-mm, 570 x 0.5 N-cm
$705
STJ100
100 x 0.1 lb-in, 1150 x 1 kgF-mm, 1150 x 1 N-cm
$705
AC1007
Mounting kit, STJ, table top
$85
Mark-10 STH Universal Torque Sensors
A great solution for general bi-directional torque testing applications requiring different sample sizes. Three interchangeable chuck capacities and bit holder are available. The STH has superb overload protection and is available in capacities from 10 oz-in to 100 lb-in.
Member of the BGI family of interchangeable sensors
Personality module" holds all calibration and configuration data
Outstanding overload protection
Interchangeable chucks (order separately
NIST-traceable certificate of calibration included
Ideal for testing torque on bottle caps, closures, valves, fasteners, and other items in sizes ranging between 0.56 - 5.7 in [14 - 148 mm] in diameter. Models contain reversible jaws or movable posts to easily accommodate a variety of shapes and sizes. Capacities available from 10 oz-in to 100 lb-in.
Member of the BGI family of interchangeable sensors
Personality module" holds all calibration and configuration data
Rugged aluminum housing
Reversible jaws for round or rectangular containers
Spill proof construction
May be used for torque tool calibration
NIST-traceable certificate of calibration included
Convert any wrench to a torque tool with this sensor, or use it as a component of a torque testing system..
Member of the BGI family of interchangeable sensors
Personality module" holds all calibration and configuration data
Stainless steel and aluminum construction
NIST-traceable certificate of calibration included
Accuracy: ± 0.6% of full scale ±1 digit + BGI
Weight: From 0.6 lbs (0.27 kg) to 2 lbs (0.9 kg)
Warranty: 3 years
Model
Capacity x Resolution
A
ØB
ØC
Drive Size
Price
STE20
20 x 0.02 lb-in, 230 x 0.2 kgF-mm, 220 x 0.2 N-cm
1.88
(47.8)
0.56
(14.2)
1.0
(25.4)
1/4"
$1135
STE50
50 x 0.05 lb-in, 580 x 0.5 kgF-mm, 570 x 0.5 N-cm
$1135
STE100
100 x 0.1 lb-in, 1150 x 1 kgF-mm, 1150 x 1 N-cm
$1135
STE200
200 x 0.2 lb-in, 2300 x 2 kgF-mm, 2200 x 2 N-cm
3.0
(76.2)
0.73
(18.5)
1.12
(28.6)
3/8"
$1135
STE400
400 x 0.5 lb-in, 4600 x 5 kgF-mm, 4500 x 5 N-cm
$1135
STE1000
1000 x 1 lb-in, 11500 x 10 kgF-mm, 11000 x 10 N-cm
3.5
(88.9)
0.98
(24.9)
1.25
(31.8)
1/2"
$1135
STE5000
5000 x 5 lb-in, 55 x 0.05 kgFm, 550 x 0.5 Nm
5.0
(127.0)
1.48
(37.6)
2.0
(50.8)
3/4"
$1135
AC1010
Mounting kit, STE 200/400, table top
$85
AC1016
Mounting kit, STE 200/400, to TST-Series Stands
$57
Mark-10 STC Lightweight Torque Sensor for Tool Calibration
Calibrate torque tools with this torque measurement sensor, or use it as a component of a torque testing system. Tapped holes on every surface allow for easy mounting to a work bench, or fixture within a testing system. Capacities available from 10 oz-in to 100 lb-in
Member of the BGI family of interchangeable sensors
"Personality module" holds all calibration and configuration data
Rugged aluminum housing
Universal mounting
May be used for torque tool calibration or as a component of a torque testing system
NIST-traceable certificate of calibration included
The Mark-10 
Mounting kit, STJ, table top 
Mounting kit, STE 200/400, table top 
