The Salter Brecknell Pegasus DCSM series floor scales are a mild steel floor scales which can be used in a wide range of industrial legal for trade weighing applications up to a capacity of 5000 lb.

• Rugged Construction– Fabricated from strong ¼" thick anti-slip checker plate with specially positioned ¼" ribbing to guarantee protection from every day wear and tear when loading and unloading with fork trucks, pallet jack and wheeled bins.
• Strength and Reliability– Designed to withstand the day to day point loading expected from fully loaded pallet jacks and steel bins.
• Finish– Hard wearing light grey powder coating gives extra protection to the floor scale when in use.
• Loadcells– Fitted with four 5000d NTEP approved nickel plated, alloy tool steel shear beam loadcells which help to supply accuracy and performance at an affordable price.
• Health and Safety– Two threaded top access eye bolt holes ensure safety when lifting and installing.
  
• Levelling Feet– Quick and easy to install, four top access holes in the deck structure allow quick and easy access to all levelling feet.
• Accurate, Reliable, and Affordable
• Low Profile– 3.1 inches high using 3/4" adjustable leveling feet
• 5000 lb Capacity– Suitable for most non legal for trade applications
• Loadcells– Fitted with four NTEP nickel platted alloy steel potted loadcells
• Finish– Hard wearing powder coat paint

Specifications

• Platform Material– Construction mild steel 1/4" deck with steel tread
• Finish– Powder coat paint
• J-Box Construction– ABS plastic
• Floor Scale Strength–
  Axle loading: 3300 lb (1500 kg)
  Point loading: 1650 lb (750 kg) over an area of 3" x 4"
• Uniformity distributed load: 6600 lb (3000 kg)
• Loadcell Material– Nickel platted alloy tool steel potted
• Loadcell Rated Output– 3 mv/V
• Loadcell Output Resistance– 350 ohm
• Loadcell Overload Protection– 150% of rated capacity, based on 2500 lb loadcells''
• End Loading– 100% of rated scale capacity
• Temperature– 14° F to 104° F (-10° C to 40° C)
• Accuracy– 1:5000 divisions
• Approvals– NTEP CC# 07-072 Class III 5,000 Divisions
  

Salter 200E Indicator
	Divisions– NTEP approved for 5,000 divisions Displays– Up to 50,000 graduations Enclosure– ABS NEMA 12 enclosure Load Cells– Drives up to four 350Ω load cells Serial Port— Full duplex RS-232 serial port Digital Calibration— Full front panel calibration Construction— Stainless steel swivel stand Power Requirements— Operates on AC adapter or 12 Volt DC Display— LED display
Load Cell Excitation – +10 VDC Load Cell Current – Drives up to four 350Ω load cells Analog Signal Input Range – 0.2 mV/V min to 3.0 mV/V max Analog Sensitivity – 0.4 μV/grad, minimum 1.0 μV/grad recommended minimum for legal-for-trade A/D Conversion Rate – Up to 25 meas/sec A/D Resolution – Up to 260,000 internal counts Display – 0.6", 6 digit Display Resolution – Up to 50,000 external grads, selectable Keyboard Functions – Units, Zero, Net/Gross, Tare, Print Annunciators – Gross, Net, kg, lb, Center of Zero, Stable, Tare, Negative, PCS Serial Port – Full duplex RS-232 format Power Requirement – 12 VDC, 500 mA wall adapter (included) Indicator Dimensions – 3.2" x 6.8" x 2.3" Operating Temp – -10° C to 40° C (14° F to 104° F) Certifications – NTEP, COC #00-065A1