|
|
Sartorius Element model ELT103.1 above
All Sartorius Element lab scales except ELT103.1 shown above |
Economically priced laboratory balances
usually do not come with enough equipment.
More expensive models, on the other hand,
often include features that are never used.
When you buy a balance today, you may not
know what demands will be made on it
tomorrow. That's why you need a balance
that can adapt to your requirements. Sartorius Element Lab Scales are entry-level balances
for the laboratory, designed for multifaceted
and changing needs. The option of
using high-capacity batteries means you can
operate the balance independently of a power
supply or in a stationary installation. Clear
operator guidance features make it easy to
adapt the balance to different applications.
And if the balance needs to be connected
to a computer at some later stage, an interface
port can be simply plugged into the
back panel.
The Sartorius Element is an entry-level balance for the laboratory, designed for multi-faceted and changing needs. The option of using high-capacity batteries means you can operate the balance independently of a power supply or in a stationary installation. Clear operator guidance features make it easy to adapt the balance to different applications. If the balance needs to be connected to a computer at some later stage, an interface port can be simply plugged into the back panel.
ELT models come with the following performance features as standard equipment:
- Stainless steel weighing pan
- Large, white backlit LCD
- Weighing Modes: g, oz, lb, lb:oz, ct, ozt, tlk, tl, gn, dwt, N
- Built-in application programs: counting, totaling, weighing in %, locking in readouts, easy below-balance density determination
- Calibration weights stored inside the housing: models: ELT103, ELT602, ELT402, ELT202, ELT1001, and ELT601
- Four digital filter levels for adaption of the balance to conditions at the place of use
- Battery-operable (eight 1.5V batteries, except model ELT103)
- Prepared for plug-in data interface adapters (YADAP-RS, YADAP-USB
Specifications
| Model |
Price |
Readability |
Capacity |
Pan Size |
Calibration |
| ELT103.1 |
$322 |
0.001 g |
100 g |
107 mm |
external |
| ELT202.1 |
$224 |
0.01 g |
200 g |
140x127 mm |
external |
| ELT402.1 |
$311 |
0.01 g |
400 g |
140x127 mm |
external |
| ELT602.1 |
$385 |
0.01 g |
600 g |
140x127 mm |
external |
| ELT601.1 |
$161 |
0.1 g |
600 g |
140x127 mm |
external |
| ELT1001.1 |
$190 |
0.1 g |
1000 g |
140x127 mm |
external |
| ELT2001.1 |
$224 |
0.1 g |
2000 g |
140x127 mm |
external |
| ELT4001.1 |
$311 |
0.1 g |
4000 g |
140x127 mm |
external |
| ELT6001.1 |
$339 |
0.1 g |
6000 g |
140x127 mm |
external |
| ELT6000.1 |
$171 |
1 g |
6000 g |
140x127 mm |
external |
Accessories:
| Group |
Descripion |
Order-Nr. |
| Data printer |
Ink ribbon cartridge, for YDP03-OCE |
6906918 |
| Data printer |
Paper rolls, for YDP03-OCE; 5 units, each with 50 m |
6906937 |
| Data printer |
Data printer, suitable for use in legal metrology; with date,time,statistics and transaction counter functions |
YDP03-0CE |
| Ionizing blower |
Ionizing blower (220V) for electrostatically charged samples |
YIB01-0DR |
| Ionizing blower |
Ionizing blower (110V) for electrostatically charged samples |
YIB01-0UR |
| Locking device |
Anti-theft locking device with cable and padlock |
LC-1 |
| RS-232C adapter |
Interface adapter with cable, for connecting the balance to a PC with a 9-pin COM port; length approx. 1 m; easy plug in |
YADAP-RS |
| Software |
SartoConnect, data transfer software, for direct input of weighing data into an application program (e.g., such as Excel) with RS232C standard cable, length: 1 m |
YSC01L |
| Software |
SartoConnect, data transfer software, for direct input of weighing data into an application program (e.g., such as Excel) with RS232C standard cable, length: 15 m |
YSC01L15 |
| Software |
SartoConnect, data transfer software, for direct input of weighing data into an application program (e.g., such as Excel) with RS232C standard cable, length: 5 m |
YSC01L5 |
| USB adapter |
Interface adapter with cable, for connecting the balance to a PC with a USB port; length approx. 1 m; easy plug in; including PC driver data on CD |
YADAP-USB |
Test and calibration weight for all ELT models: extensive range of weights, optionally with DKD certificate, available on request. Additional accessories available on request
Additional accessories available on request
Features
 |
The Sartorius Element can
even perform density
determination with belowbalance
weighing. Other
programs, such as counting,
weighing in percent,
totalizing and display
lock mode, can be easily
selected. Results can be
viewed in 14 different
weight units. |
 |
Calibrating the balance is especially easy –
just one key is all it takes. What’s more, many
Element models come with calibration
weights stored in the housing. The calibration
value is selectable, so available weights with
a different load can be used. |
 |
Clear allocation of functions to keys and
easy-to-understand symbols enable intuitive
operation. The large, white backlit display is
exceptionally easy to read. All models include a level indicator and adjustable feet as
standard features, for optimal adjustment to
the place of installation. |
 |
 |
The high-performance ELT103 balance
enables highly accurate measurements with
a readability of 1 mg. The glass draft shield
ensures stable results every time. |
A data interface can be retrofitted to the
balance at any time. If the need for data
transfer capabilities does not arise until long
after the balance has been purchased, an
interface can be ordered separately and
installed by the user. |
 |
|
With eight high-capacity 1.5 V batteries in
the battery compartment, lengthy measurement
series can be performed outside the
lab at any time. The hook for below-balance
weighing is protected by a plastic cover on
the bottom of the balance. |
|
|
Optional Accessories:
| Model |
Descripion |
Price |
|
| YDP03-OCE |
Data Printer with statistics and time/date functions, included cable fits RS232 |
$750 |
|
| 6906918 |
Ink ribbon cartridge, for YDP03-OCE |
$18 |
|
| 6906937 |
Paper rolls, for YDP03-OCE; 5 units, each with 50 m |
$18 |
|
| YADAP-RS |
RS232 Adapter with cable, 6 foot |
$70 |
|
| YADAP-USB |
USB Adapter with cable, 6 foot |
$70 |
|
| 72US1010.3 |
Data Transfer Software Wedge for DOS and Windows. Includes 5 foot cable, fits RS232
Completely collects balance data and transfers it to any DOS/WIndows application program |
$285 |
|
| 641211 |
Weighing Bowl, 240 g, 1000 mL, chrome-nickel steel, 7" diameter, 2.8" high |
$125 |
|
| YIB01-0UR |
Ionizing Blower (neutralizes static changes), for use on samples pro to weighing (on any balance) |
$990 |
|
| YSTP01 |
Stat Pen, neutralizes static electricity on samples |
$1005 |
|
| 69US0094 |
Static Master |
$119 |
|
| LC1 |
Locking Device, anti-theft |
$15 |
|
| SGK-A.1 |
Specific Gravity Kit for Element Series |
$90 |
|
| 902580.1 |
Carrying Case |
$55 |
|
Sartorius YDP03-OCE Statistical Printer
Retail Price: $835 - Our Price - $750 |
The Sartorius YDP03-OCE data printer has a built-in real-time clock and statistics programs -- designed for Sartorius balances equipped with an RS-232 interface. Text and data are printed with up to 24 characters per line and the unit is equipped with a real-time clock. A high contrast LCD shows the date or time as well as the current transaction number and integrated rechargeable batteries with battery level indicator. The printer runs on the balance's power -- no separate power supply is necessary. Easy to change paper roll and ink ribbon cassette.
The Sartorius YDP03-OCE data printer meets the quality standards of the chemical and pharmaceutical industries in compliance with the requirements of GLP (Good Laboratory Practice) and GMP(Good manufacturing Practice).
In addition to recording individual weighing data the data printer can generate a statistical evaluation of weighing data. All values transferred from an on-line weighing instrument are stored. The following can be computed/printed out.
- Number of weighing operations
- Mean value
- Standard deviation
- Variation coefficient
- Minimum value/weight
- Maximum vale/weight
- Difference between the maximum and minimum value/weight
The Sartorius YDP03-OCE data printer is powered by the Sartorius Balance via the printer cable that is supplied with the YDP03-OCE data printer. Turning ON the Sartorius balance when the printer is connected will automatically turn ON the printer. The rechargeable batteries with be charging when printer is not in use, but the balance is turned ON. The Sartorius YDP03-OCE uses a standard paper roll 57.5 mm ±0.5mm with a maximum diameter of 65mm.
- Dimensions: 6.2 W x 9.1 H x 3.1 D inches (158 x 230 x 80 mm)
- Print Speed: 2.5 lines/second
- Characters per line: 24
- Operating Temperature: 0 to 40°C / 32 to 104 °F
- Power: Runs on the balance's power, no separate power supply necessary
- Equipped with printer interface cable for connecting the printer to the Sartorius balance, Black ink ribbon cassette installed in unit and 4 NiCd rechargeable batteries and 1 roll of paper.
|
|
Specials