Itin Scale Company - LOWEST Prices GUARANTEED!
Home Products By Manufacturer Store Policies Contact Us Shopping Cart

Specials

Analytical/Lab

Baby Scales

Bathroom Scales

Body Fat Scales

Counting Scales

Crane Scales

Fishing Scales

Game Scales

Floor/Drum Scales

Food/Deli Scales

Force Testing

Height Rods

Industrial Scales

Jewelry Scales

Kitchen Scales

Legal For Trade

Medical Scales

Pocket Scales

Retail Scales

Shipping/Mail Scales

Specialty Medical

Torque Gauges and Torque Testing Equipment
Force Testing

Imada Torque Testing Equipment

Imada HTG-Series Digital Jacobs Chuck Torque Gauges HTG2-Series Digital Jacobs Chuck Torque Gauges
Programmable high / low setpoints, 960 data memory, reads in lb-in, kg-cm and N-cm, RS232, digimatic or analog outputs, real time and peak mode selectable, tare, overload alarm and low battery indicator, built in rechargeable NiCad batter and AC adapter
- 70 x 0.01 oz-in
- 15 x 0.01 lb-in
- 40 x 0.01 lb-in
- 85 x 0.1 lb-in
From $1424.75
Imada DTX Digital Cap Torque Tester DTX2 Digital Cap Torque Tester
Programmable high / low setpoints, 960 data memory, clamps containers from 1/2" to 7" diameter, RS232, reads in lb-in, kg-cm and N-cm, digimatic or analog outputs, real time and peak mode selectable, tare, overload alarm, built in rechargeable NiCad batter and AC adapter
- 15 x 0.01 lb-in
- 40 x 0.01 lb-in
- 85 x 0.1 lb-in
$1635
Imada DI-5-RL Torque Gauge Imada DI-5-RL Torque Gauge
Reads in lb-in, kg-cm and N-cm, peak, real time and peak down measuring modes, 400 data memory, programmable high / low setpoints, zero reset, RS232, internal NiCad battery or AC adapter, ±0.5% F.S. ±1 LSD accuracy
- 0.15 ~ 18 lb-in
- 1.5 ~ 90 lb-in
$1085
Imada DSD-4 Torque Screwdriver / Torque Tester Imada DID4 Torque Screwdriver / Torque Tester

FREE UPS Ground Shipping
Available in: lb-in, oz-in, kg-cm, N-cm or N-m, peak, real time and peak down modes, 400 data memory, programmable high / low setpoints, programmable screw tightening counter and auto zero function, CW and CCW operation, USB , internal NiCad or AC adapter
- ozf-in 2.0~560.0
- lbf-in 0.20~34.75
- kgf-cm 0.20~40.00
- N-cm 2.0~400.0
$684.75
Imada DSW-15 Torque Wrench Imada DSW-15 Torque Wrench
Available in lbf-in, oz-in, kg-cm, N-cm or N-m versions, peak, real time and peak down modes, 400 data memory, programmable high / low setpoints, programmable screw tightening counter and auto zero, CW and CCW operation, RS232, internal NiCad or AC adapter
- 3-130 lb-in
- 30-2100 oz-in
- 3-150 kg-cm
- 100-1500 N-cm
- 1-15 N-m
$1085
Imada DSW-75 Torque Wrench Imada DW-75 Torque Wrench
Available in lbf-in, lb-ft, kg-cm or N-m versions, wrench head swivels 300°, ±0.5% F.S. ±1 LSD accuracy, 400 data memory, CW and CCW operation, RS232, internal NiCad or AC power, programmable high / low setpoints
- 3 - 660 lb-in
- 0.3 - 55 lb-ft
- 3 x 750 kg-cm
- 0.3 - 75 N-m
$1245
Imada I-Series Non-Impact Torque Testers for Power Drivers & Wrenches Imada I-Series Non-Impact Torque Testers for Power Drivers & Wrenches
Imada i-series digital torque testers are ideal for calibrating power screwdrivers with torque control. With peak mode, real time mode and peak down mode. Standard 3/8 inch drive. Comes with RS-232, case, 2 adapters.
- 0.03 ~ 7.0 lb-in (0.001 lb-in)
- 0.3 - 70.0 lb-in (0.01 lb-in)
- 1.5 - 130.0 lb-in (0.1 lb-in)
from $1624.75
DI-3N-Digital Torque Testers with Remote Sensors DI-3N-Digital Torque Testers with Remote Sensors
Imada DI-3N-IP digital torque testers with a flanged remote sensor calibrates torque tools up to 362 lb-ft with accuracy of +/- 5% FS. Measures in peak, real time and peak down modes. 400 internal memory and RS-232. In lb-in, kg-cm, N-cm or lb-ft, kg-m and N-m
- 0.30 - 44.0 lb-in
- 3.0 - 440.0 lb-in
- 30.0 - 1800 lb-in
- 3.0 - 145.0 lb-ft
- 3.0 - 362.0 lb-ft
from $1205
Imada DI-1M Digital Torque Tester for Air Tools & Impact Torque Wrenches Imada DI-1M Digital Torque Tester for Air Tools & Impact Torque Wrenches
Imada DI-1M torque testers are perfectly suited for on-the-spot calibration of impact drivers and air tools, but will calibrate any type of power driver. With peak, real time and peak down modes. With RS-232 and accuracy of +/-0.5%. Measures in lb-in, lb-ft, kg-cm, kg-m, N-cm or N-m.
- 3.0 - 440.0 lb-in
- 30.0 - 1800 lb-in
- 3.0 - 145.0 lb-ft
- 3.0 - 362.0 lb-ft
$2185
Imada DI-4B-25 Air Tool & Impact Wrench Digital Torque Tester Imada DI-4B-25 Air Tool & Impact Wrench Digital Torque Tester
Imada DI-4B-25 fast response torque testers are perfectly suited for on-the-spot calibration of air tools and impact drivers, but will calibrate any type of manual wrenches. With peak, real time and peak down modes, RS-232 and accuracy of +/-0.5%. Measures in lb-in, kg-cm and N-cm
- 3.0~220.0 lb-in $1950.00

Chatillon Torque Testing Equipment

Chatillon DFS-R-ND Series with Remote Loadcell Chatillon DFS-R-ND Series with Remote Loadcell
Accurate load and torque measurement with the same gauge. Accuracy >= 0.25% full scale with interchangeable sensors and >= 0.1% full scale with a dedicated SCL load sensor. With normal and peak readings, high / low limits, setpoints, pass / fail results, statistical results, load averaging, load comparisons, percentage and sharp break detection, sensor actuation and direction. Measurements are displayed in ounce, gram, pound, kilogram or Newton units or in oz-in, g-cm, lb-in, N-cm and N-m units. Results displayed in oz, g, lb, kg or N units or in oz-in, g-cm, lb-in, N-cm and N-m. With RS232

Torque:
- 3 lb x 0.0005 lb
- 12 lb x 0.002 lb
- 50 lb x 0.01 lb
- 100 lb x 0.02 lb
- 200 lb x 0.04 lb

Load:
- 0.55 lb x 0.0001 lb
- 2.2 lb x 0.0005 lb
- 11 lb x 0.002 lb
- 22 lb x 0.005 lb
- 50 lb x 0.01 lb
- 100 lb x 0.02 lb
- 220 lb x 0.05 lb
- 560 lb x 0.1 lb
- 1100 lb x 0.2 lb

Gauge $995.00
Torque Sensors $1149.74
Load Sensors from $645.81

 

Mark-10 Torque Testing

Mark 10 MGT Digital Torque Gauges
Mark 10 MGT Digital Torque Gauges
±0.5% accuracy. Dedicated remote torque sensor with Jacobs chuck and compact size. Rugged aluminum housing with peak memory for clockwise and counterclockwise readings. With push button calibration and 30 readings/second sampling rate.
- Capacity: 10 oz-in to 100 lb-in from $1021
Mark 10 CT Closure Tester
Mark 10 CTA Closure Tester
±0.5% accuracy. A powerful, yet value priced solution for closure manufacturers, bottlers, food and beverage companies, and others. Broad sample size range, rugged construction and simple hand operation.
- Capacity: 12 to 100 lb-in $1230.25
Mark 10 TST/TSTH Manual Torque Test Stand
Mark 10 TST/TSTH Manual Torque Test Stand
Mark 10 TST / TSTH Manual Torque Test Stands
Ideal for a wide variety of torque testing applications up to 100 lb-in, including closure torque testing, fastener torque testing, and more. The TST’s versatile modular design allows it to be configured for a variety of torque sensors and gripping fixtures.

- Capacity: 100 lb-in

$2470
Mark 10 STA Torque Tool Tester Mark 10 STA Torque Tool Tester
A simple yet accurate solution for testing torque screwdrivers, wrenches, and other tools. Applications exist in manufacturing facilities in virtually every industry. The STA features a solid aluminum housing, making it rugged enough for many years of service in production or laboratory use, while a universal receptacle with square drive and grooves accepts common bits and attachments.
- 12 x 0.01 lbin
- 50 x 0.05 lbin
- 100 x 0.1 lbin
$1135.25
 


Products
About Us | Weight Conversion Calculator |
Request Quotation | Shipping Charge Estimator | Monthly Specials

 AND Scales | Acculab Scales | Best Weight Scales | CAS Scales | Chatillon/Ametek Scales | Detecto Scales | DigiWeigh | Dillon | Dillon | Easy Weigh | HealthOMeter | Hoto Instruments | Imada | InScale | Mark-10 | MedWeigh | Mettler Toledo® | Minx Pocket Scales | Ohaus Scales | Salter Brecknell | Sartorius Balances | Seca | Tanita Scales   Analytical/Laboratory Scales | Bathroom Scales | Bariatric Scales | Body Fat Monitors/Scales | Pro Body Composition Analyzers | Calibration Weights | Counting ScalesEducation Scales | Force Gauges Fish/Game Scales | Floor Scales | Deli/Food Scales | Crane Scales | Dynamometers & Spring Gauges | General Purpose Scales & Equipment | Health/Medical Scales | Height Measurement Systems | Industrial Scales | Jewelry Scales | "Legal for Trade" Scales | Livestock Scales | Moisture Balances | Retail Scales | Shipping Scales | Specialty Scales & Equipment | Test Stands / Force Measurement | Veterinary Scales | Gift Ideas 
Polar Heart Rate Monitors | Omron Blood Pressure Monitors




Copyright © 1998-2011 Itin Scale Co., Inc.   All rights reserved.